R1AT Steel Wire Braided Rubber Hose

Home » Products » Steel Wire Braided Rubber Hose » R1AT Steel Wire Braided Rubber Hose
R1AT Steel Wire Braided Rubber Hose

This range of soft and portable steel wire braided rubber hose is manufactured in full compliance with SAE J517 and SAE 100R1AT standards. It can be applied to the temperature ranging from -40℃ to 100℃. Customized wire reinforced hoses are also available. The maximum length for a single rubber tubing is up to 100 meters.

Construction Features
1. The inner tubing for the steel wire braided hose is made of synthetic rubber, and features oil resistant as well as superior air and oil proof performances.
2. The highly strength reinforcement layer for the SAE 100R1AT hydraulic hose consists of braided copper-facing steel wire. It provides the reinforced synthetic rubber hose with great resistance to twist and high pressure.
3. The rubber cover for the steel wire reinforced rubber hose is not only resistant to abrasion, oil and weather, but also shows excellent aging resistance.
4. The hose is available with black colored, textured surface.

Applications
Our steel wire braided rubber hose is widely used for delivering of petroleum based or water based hydraulic liquids under low or medium pressure conditions. It has found a wide range of applications in hydraulic engineering equipment sets and hydraulic systems. Contact us now if you need low pressure hoses or medium pressure hoses.

Comparison between R2AT and R1AT
The external diameter of R1AT series ranges from 11.9mm to 65.2mm. Compared to R2AT series high pressure hoses with the same inner tube diameter, R1AT series steel wire braided rubber hose is smaller in the reinforcement diameter and outer diameter. Therefore, the correspondent working pressure is much smaller than that of R2AT series. And the maximum working pressure of R1AT series is 210bar.

Parameter

SAE 100R1AT
Inside Diameter Reinfor cement Diameter Outer Diam eter Working Pressure Proof Pres sure Burst Pres sure Min. Bend Radius Weight
inch mm mm mm psi bar bar bar mm kg/m
3/16 4.6 - 5.4 8.9 - 10.1 11.9 - 12.5 3045 210 420 840 89 0.25
1/4 6.2 - 7.0 10.8 - 11.4 12.7 -13.5 2784 192 384 768 102 0.25
5/16 7.7 - 8.5 12.5 - 13.1 14.6 - 15.4 2538 175 350 700 114 0.31
3/8 9.3 - 10.1 14.5 - 15.1 16.7 - 17.5 2277 157 314 628 127 0.36
1/2 12.3-13.5 17.7-18.3 19.8 - 20.6 2030 140 280 560 178 0.45
5/8 15.5 - 16.7 21.1 - 21.7 23.2 - 27.7 1523 105 210 420 203 0.52
3/4 18.6-19.8 24.6 - 25.4 34.6 -35.4 1262 87 174 348 241 0.65
1 25.0-26.4 32.1 - 32.9 43.3 -44.1 1015 70 140 280 305 0.91
1 1/4 31.4-33.0 40.8 - 41.6 49.7-50.5 624 43 86 172 419 1.3
1 1/2 37.7-39.3 47.2 - 48.0 62.4 -63.2 508 350 70 140 508 1.7
2 50.4-52.0 59.9 - 60.7 64.4 -65.2 377 26 52 104 635 2

Package
The steel wire braided rubber tubing is packaged by plastic film first, and then packed in the carton or wooden case upon request. Also, customized package is available.

As a specialized R1AT steel wire braided hydraulic rubber hose manufacturer and supplier in China, JINTONG also provides Teflon hose, steel wire spiral hydraulic hose rubber steam hose, twin welding hose, and more.

Feedback Form
Other Products